I have a late 80s Craftsman 10HP, 32 trac drive snowblower, Model #536.885010, and was wondering what type of grease/oil is used in the auger worm drive gearbox? The manual does not have any info on this. Thanks.
This is a very good question. The answer is it depends on who you ask. The gear box holds about 3oz. I think that the best grease is Shell Alvania EPR00 available from MTD dealers as part number 737-0168A 8oz tube. If you are in Canada you can get a quart bottle MTD number 837-0168. Murray Noma the maker of your snow thrower says their part number 333431MA is the grease to use (their grease is Lubriplate GR-132). Toro uses the same gear box in their small snow throwers (different gearing) they say to use MAG 1 from Lubriplate. Other suitable grease would be ALCO super lube 00(I think this is very close to the Shell grease) or Lubriplate MAG 00.
AJ
Excellent answer AJ. Snowman, the simplest term is to use a quality 00 grease, which is a winter weight grease.
OK, guys so the geat box for the auger drive on my ST1028 snow blower takes 00 greease through the FILLER HOLE now some sort of light waight gear lube??
Originally Posted by shortlid
OK, guys so the geat box for the auger drive on my ST1028 snow blower takes 00 greease through the FILLER HOLE now some sort of light waight gear lube??
If you could post the model make we can look it up. There should be a sticker on the motor/wheel box those are the numbers we need.
AJ
The units model # is 924086-006710
I have heard that GL-5 gear lube attacks soft metals like bronze? Is that why people sugest trhe Redline 75W-90 NS becasue it is GL-4?
Originally Posted by shortlid
The units model # is 924086-006710
I have heard that GL-5 gear lube attacks soft metals like bronze? Is that why people sugest trhe Redline 75W-90 NS becasue it is GL-4?
You have an Ariens You should use their special gear lube part number 00008000. There is no cross reference that I know of.
AJ
75W90 is way too thick heavy for a snowblower. Remeber, these are used in cold weather and if stored in an unheated place, 75W90 becomes extremely thick.
I use EPOO grease in then gear boxes. EP= extreme pressure.
Originally Posted by aj-allen
You have an Ariens You should use their special gear lube part number 00008000. There is no cross reference that I know of.
AJ
OK, how much is much is a bottle of thsi special lube?
My manual calls for S.A.E. 30 engine oil. Fill until it runs out of the hole.
Tags: craftsman, snowblower, auger, gearbox, gear lube, part number, Originally Posted, 00008000 There, 00008000 There cross, 00008000 There cross reference, 00008000 There cross reference that
